87
12
SPECIFICATIONS AND OPTIONS
■ Specications
IC-M410BB/IC-M510BB USA Version
D General
• Frequency coverage: TX 156.025 ~ 157.425 MHz
RX 156.050 ~ 163.275 MHz
DSC (CH70) 156.525 MHz
AIS (CH A/B)* 161.975 MHz/162.025 MHz
• Mode: 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (AIS)*
• Operating temperature range: –20°C ~ +60°C, –4ºF ~ +140ºF
• Current drain (at 13.8 V): TX high (25 W) 5.5 A maximum
RX Maximum audio 1.5 A maximum (HM-195 × 1)
IC-M410BB 4.0 A maximum
(RX Hailer × 2)
IC-M510BB 4.5 A maximum
(RX Hailer × 3)
• Power supply requirement: Negative ground 13.8 V DC (11.7 ~ 15.9 V DC)
• Antenna impedance:
• Dimensions: Transceiver 216 (W) × 79 (H) × 113 (D) mm
8.5 (W) × 3.1 (H) × 4.4 (D) in
Command microphone 67.5 (W) × 144.5 (H) × 37 (D) mm
2.7 (W) × 5.7 (H) ×1.5 (D) in
• Weight (approximate): IC-M410BB 870 g, 1.9 lb
IC-M510BB 890 g, 2 lb
Command microphone 400 g, 14.1 oz
D Transmitter
• Output power: 25 W or 1 W
• Modulation system: Variable reactance frequency modulation
• Maximum frequency deviation: ±5 kHz
• Spurious emissions:
• Frequency tolerance ±0.5 kHz
• Adjacent channel power: More than 70 dB
• Audio harmonic distortion:
• Residual modulation: More than 40 dB
• Audio frequency response: +1 dB to –3 dB of 6 dB octave from 300 Hz to 3000 Hz
D Receiver
• Receive system: Double conversion superheterodyne
• Sensitivity: FM –13
DSC (CH70) –7
AIS*
• Squelch sensitivity:
• Intermodulation rejection ratio: FM More than 70 dB
• Spurious response: FM More than 70 dB
• Adjacent channel selectivity: FM More than 70 dB
• Audio output power:
Command microphone 2 W
External Speaker 15 W
• Hum and noise: More than 40 dB
• Audio frequency response: +1 dB to –3 dB of –6 dB octave from 300 Hz to 3000 Hz
FELLECS-TECH | inbox@fellecs-tech.com | www.fellecs-tech.com
To Next Page
Loading...
