Icom IC-M410BB - Page 48

35
7
DIGITAL SELECTIVE CALLING (DSC)
D Receiving a Distress Relay call
When a Distress Relay call is received:
• An alarm sounds.
• 
• “
” blinks.
1. Push .
2. 
operation.

Returns to the operating screen.
The call is saved in the DSC Log.
“
” blinks continuously until you
display the call message.

Holds the RX call task, and
returns to the Main screen.

is not displayed if the

“Manual.” (p. 44)

assigned channel is automatically
selected.
The call is saved in the DSC Log.

Accepts the call. Channel 16 is
automatically selected. Monitor
Channel 16 as a coast station
may require assistance. After
Channel 16 is selected, select



 
operating screen.
 
“DISTRESS HISTORY”
screen.
3. Push
, and then to return to the operating
screen.
FELLECS-TECH | inbox@fellecs-tech.com | www.fellecs-tech.com