Icom IC-M410BB - Page 52

39
7
DIGITAL SELECTIVE CALLING (DSC)
D Receiving a Test call
When a Test call is received:
• An alarm sounds.
• “RECEIVED TEST CALL” is displayed.
1. Push
to turn OFF the alarm.
2. 
operation.

Ignores the call and returns to the
operating screen.
• The call is saved in the DSC Log.
• “
” blinks continuously until you
display the call message.

Holds the RX call task, and returns
to the Main screen.

( Able to
comply)

“Able to Comply.”
• The call is saved in the DSC Log.

Accepts the call.
• Displays the received call’s
information.
• The call is saved in the DSC Log.
• The received call’s information is
displayed.
Push
, and then push

(p. 28)
Push
to resend.
FELLECS-TECH | inbox@fellecs-tech.com | www.fellecs-tech.com