Icom IC-M410BB - Page 60

47
7
DIGITAL SELECTIVE CALLING (DSC)
D Using an AIS transponder
Transponder operation:
1. Select an AIS target on the plotter display, Target,
Danger, or Friends list screen.
L See the MA-510TR INSTRUCTION MANUAL for
details.
2. 
• 
3. Select “Send DSC,” and then push [ENT].
• The “DSC TRANSMISSION” screen is displayed.
4. 
• Voice channels are already preset into the transponder
in the recommended order.
NOTE: When a base station is selected in step 1, a

Therefore you cannot change the channel. The


5. Push [ENT] to make the Individual DSC call.
• “Transmitting individual call” is displayed.
L If Channel 70 is busy, the transceiver stands by until
the channel becomes clear.
6. After making the Individual DSC call, “DSC
transmission completed.” is displayed.
• If the transceiver cannot make the call, “DSC
transmission failed.” is displayed.
FELLECS-TECH | inbox@fellecs-tech.com | www.fellecs-tech.com