49
7
DIGITAL SELECTIVE CALLING (DSC)
■ DSC Remote Control (EN 300 338-8 compatible)
With controllers connected to the transceiver, you can perform DSC remote control
D Editing a controller name
1. Open the “NAME” screen.
Name
L Only controllers connected to the transceiver
are listed.
L “MIC3” and “” can be selected for
L
appended to its name.
2.
controller.
3. Push [ENT] or [DIAL] to enter the
“NAME” screen.
4. Edit a controller name.
L Select to enter numbers, and to enter symbols.
5. Select , and then push [ENT] or [DIAL] to save the edited name and return to
the previous screen.
D Setting the Priority Controller
The Priority Controller takes precedence over other controllers in DSC operations.
operated.
1. Open the “PRIORITY” screen.
Priority
L Only controllers connected to the transceiver
are listed.
L “MIC3” and “” can be selected for
L
appended to its name.
2.
controller to be used as the Priority Controller.
L The Priority Controller’s ID is automatically set to 0.
NOTE:
•
Priority Controller.
•
DSC remote control from the device is accepted.
FELLECS-TECH | inbox@fellecs-tech.com | www.fellecs-tech.com
To Next Page
Loading...
