Icom IC-M410BB - Page 86

73
10
MENU SCREEN
■ Using the Menu screen
The Menu screen is used to set items, select
options, and so on for the transceiver’s functions.
D Menu screen operation
Example: Setting the key beep to “OFF.”
1. Push [MENU].
• The Menu screen is displayed.
2. Push [▲] or [▼], or rotate [DIAL] to select
“Settings,” and then push [ENT], [DIAL], or
[►].
• The “SETTINGS” screen is displayed.
L Holding down [▲] or [▼], or rotate [DIAL]
sequentially scrolls up or down through the
Menu screen.
3. Push [▲] or [▼], or rotate [DIAL] to select
“Configuration,” and then push [ENT], [DIAL],
or [►].
• The “CONFIGURATION” screen is displayed.
4. Push [▲] or [▼], or rotate [DIAL] to select
“Key Beep,” and then push [ENT], [DIAL], or
[►].
• The “KEY BEEP” screen is displayed.
5. Push [▲] or [▼], or rotate [DIAL] to select
“OFF,” and then push [ENT] or [DIAL].
• “OFF” is set and the transceiver returns to the
previous screen.
TIP:
• To exit the Menu screen, push [MENU].
• To return to the previous screen, push [◄] or
[CLEAR].
FELLECS-TECH | inbox@fellecs-tech.com | www.fellecs-tech.com