Icom IC-M410BB - Page 96

83
11
CONNECTIONS
■ Supplied accessories
Warning sticker
(For only the USA version)
NOTE: 󰀨
depending on the transceiver version.
■ Fuse replacement


damaged fuse with a new one of the proper rating.
Fuse Coding explanation
Fuse Coding: F 250 V 10 A
Fuse Voltage Rating: 250 Volts
Fuse Current Rating: 10 Amperes
Command microphone

Microphone hanger
For Command microphone


Black
Yellow


Self-tapping screws
(5 × 20 mm)
Spring washers (M5)
Self-tapping screws
(3 × 16 mm)
Flat washers (M5)


(Yellow: Speaker (+), Black: Speaker (–))
Connector cap
FELLECS-TECH | inbox@fellecs-tech.com | www.fellecs-tech.com