Icom MA-510TR - COM Port Setting; 4 For Your Reference

5
4. FOR YOUR REFERENCE
COM Port setting
To change the COM Port number setting after you have installed the USB driver, rst connect the transponder to
the PC, and then turn ON the transponder.
1. Click the folder icon on the taskbar.
Click
2. Right-click “This PC,” and then click “Properties.”
q Right-click
w Click
3. Click [Device Manager].
Click
• The “Device Manager” screen is displayed.
4. Double-click “Ports (COM & LPT)” on the “Device
Manager” screen.
Double-click
5. Right-click “MA-510TR (COM),” and then click
“Properties.”
L The COM port number is displayed instead of “.”
q Right-click
w Click
6. Click the [Port Settings] tab, and then click
<Advanced...>.
w Click
q Click
7. Select the COM port number, and then click
<OK>.
w Click
q Select
8. Click <OK> to close the screen.
Click