ICON Health & Fitness Pro-Form Performance 400i User Manual

40 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

USER’S MANUAL

proform.com

Model No. PFTL59518.0

Serial No.

Write the serial number in the space

above for reference.

CAUTION

Read all precautions and

instructions in this manual before

using this equipment. Save this

manual for future reference.

To register your product and

activate your warranty today,

go to my.proform.com.

For service at any time, go to

proformservice.com.

Or call 1-888-533-1333

Mon.–Fri. 6 a.m.–6 p.m. MT

Sat. 8 a.m.–12 p.m. MT

Please do not contact the store.

ACTIVATE YOUR

WARRANTY

CUSTOMER CARE

Serial Number

Decal

Table of Contents

Questions and Answers:

A
Aaron GonzalezJul 28, 2025
How to fix ICON Health & Fitness Pro-Form Performance 400i when the power does not turn on?
- B
  Brandi GallagherJul 28, 2025
  If the ICON Health & Fitness Treadmill's power doesn't turn on, ensure the power cord is plugged into a surge suppressor, and the surge suppressor is correctly plugged into a grounded outlet. Also, make sure the key is properly inserted into the console. If your circuit breaker trips repeatedly, consider purchasing an arc filter. If the power switch has tripped (protrudes), wait five minutes, then press it back in to reset.
P
phillip93Aug 1, 2025
What to do if ICON Health & Fitness Treadmill power turns off during use?
- K
  Kimberly WilliamsonAug 1, 2025
  If your ICON Health & Fitness Treadmill turns off during use, check the power switch; if it has tripped, wait five minutes before pressing it back in. Ensure the power cord is securely plugged in; if it is, unplug it, wait five minutes, and plug it back in. Additionally, try removing and reinserting the key from the console.
T
tlopezAug 5, 2025
Why is the walking belt slipping on my ICON Health & Fitness Pro-Form Performance 400i Treadmill?
- R
  Rachel MasonAug 5, 2025
  To address a walking belt that slips on your ICON Health & Fitness Treadmill, first remove the key and unplug the power cord. Then, using the hex key, turn both idler roller screws clockwise, 1/4 of a turn.
J
Jonathan ValdezAug 9, 2025
How to center the walking belt on ICON Health & Fitness Pro-Form Performance 400i?
- I
  iphillipsAug 9, 2025
  If the walking belt on your ICON Health & Fitness Treadmill is not centered, and has shifted to the left, use the hex key to turn the left idler roller screw clockwise 1/2 of a turn. If it has shifted to the right, turn the left idler roller screw counterclockwise 1/2 of a turn.
D
duanemillerAug 14, 2025
What to do if ICON Health & Fitness Pro-Form Performance 400i console displays don't function properly?
- T
  Taylor BradyAug 14, 2025
  If the displays on your ICON Health & Fitness Treadmill console aren't functioning correctly, try resetting the console to its factory default settings. This requires two people. First, turn the power switch off. Then, find the small reset opening on the console, and use a bent paper clip to press and hold the reset button inside.
S
Steven HernandezAug 19, 2025
Why does the ICON Health & Fitness Pro-Form Performance 400i walking belt slow down when I walk on it?
- C
  Christine WolfeAug 19, 2025
  To resolve the issue of the walking belt slowing down when walked on your ICON Health & Fitness Treadmill: if the walking belt is overtightened, use the hex key to turn both idler roller screws counterclockwise, 1/4 of a turn. Also, do not apply silicone spray or other substances to the walking belt or the walking platform unless instructed by an authorized service representative.

ICON Health & Fitness Pro-Form Performance 400i Specifications

General

Brand	ICON Health & Fitness
Model	Pro-Form Performance 400i
Category	Treadmill
Language	English

Summary

Treadmill Usage Guide

Connect Treadmill Power Cord

Guides on connecting the treadmill power cord, including surge suppressor usage.

Powering On the Treadmill

Using the Touch Screen Interface

Console Setup Procedures

Connect to Wireless Network

Connects the console to a wireless network for internet access and iFit features.

System Updates and Calibration

Manages console firmware updates and calibrates the incline system.

Using the Manual Mode

Start Manual Mode: Key and Menu

Inserts the key and selects the main menu to begin using manual mode.

Adjust Speed and Incline

Starts the walking belt and adjusts speed and incline during manual workouts.

Using Map Workouts

Initiate Map Workouts

Inserts key, selects main menu, and chooses a map workout from the library.

Execute and Monitor Map Workouts

Creating Custom Map Workouts

Prepare to Draw Custom Map

Draw and Save Custom Map

Draws a custom map route, saves the workout, and starts the exercise session.

Using Distance or Time Workouts

Schedule Workouts on iFit.com

Initiate Distance/Time Workout

Inserts key, selects main menu, logs into iFit account.

Start and Monitor Distance/Time Workouts

Console Maintenance and Updates

Access Maintenance Section and Update Firmware

Wireless Network Connectivity

Enable and Connect Wi-Fi

Folding and Moving the Treadmill

Folding the Treadmill

Step-by-step instructions on how to safely fold the treadmill for storage.

Moving the Treadmill

Lowering Treadmill for Use

Maintenance and Troubleshooting

Troubleshooting Common Issues

Solutions for common problems such as power, belt, incline, and console malfunctions.

Ordering Replacement Parts

Related product manuals

PRO-FORM POWER 995i

Pro-Form Power 525i

Pro-Form Power 1295i

Pro-Form 525 CT

Pro-Form City L6

Pro-Form Pro 9000

PRO-FORM PRO 5000

PRO-FORM SPORT 6.0

Pro-Form Cadence WLT

PRO-FORM TRAINER 720

Pro-Form Trainer 10.0

Pro-Form Cadence LT2.5