ICON EDGE USER MANUAL
3
Please be aware that damage caused by any modifications to the device are not subject to warranty.
Keep away from children and non-professionals.
1.2. GENERAL GUIDELINES
1) This device is a lighting effect for professional use on stages, in discotheques, theatres, etc., the
device was designed for indoor use only.
2) This fixture is only allowed to be operated within the maximum alternating current as stated in the
technical specifications in section 2 of this manual.
3) Handle the device with care, avoid shaking or using force when installing or maintaining the device.
4) When choosing the installation location, please make sure that the device is not exposed to
extreme heat, moisture or dust.
5) If you use the quick lock cam when rigging the device, make sure the quick lock fasteners are
located in the quick lock holes correctly and securely.
6) Operate the device only after having familiarised yourself with its functions. Do not permit operation
by persons not qualified for operating the device. Most damages are the result of unprofessional
operation.
7) Please use the original packaging if the device is to be transported.
8) The applicable temperature for the device is between -10°C to 45°C. Do not use the device outside
of this temperature range.
For safety reasons, please be aware that all modifications to the device are forbidden.
If this device is operated in any way different to the ones described in this manual, the product may
suffer damage and the warranty becomes void. Furthermore, any other operation may lead to
short-circuits, burns, electric shocks etc.
To Next Page
Loading...
