IconBiT IK-1972K - Product Overview; General Information; What You Need To Know; Product Description

English 1/4
Congratulations on the purchase of your new Kick Scooter TRACER STREET. The information in this User Manual will help you better understand, enjoy and maintain
your Kick Scooter TRACER STREET.
PLEASE READ THE USER MANUAL THOROUGHLY BEFORE OPERATING . Always wear the proper safety gear before operating.
Enjoy your Kick Scooter TRACER STREET!
WARNING! IMPROPER USE OF THE SCOOTER AND/OR FAILURE TO READ THIS USER MANUAL MAY LEAD TO SERIOUS BODILY INJURY AND DEATH.
On 15.06.2019, the new Electric Vehicle Regulation (eKFV) has been nalized, so Kick Scooters can legally participate in road traffic in Gemany.
The ideas behind it are to enable new ways of modern, environmentally friendly and clean mobility in our cities.
The iconBIT Kick Scooter TRACER STREET is approved for road trac according to eKFV and owns the General Permission to be used in roads in Germany.
Further information is available at: https://www.gesetze-im-internet.de/ekfv/BJNR075610019.html and http://www.cps.gov.uk/legal/p_to_r/road_tra c_o ences / # dot.
1. Product Overview
1.1. General Information
The original kick Scooter TRACER STREET is an intuitive, technologically advanced solution. Using the latest technology and production processes, each scooter
undergoes strict testing for quality and durability. With its lightweight, portable design, ease of use, range, and low carbon footprint.
1.2. What You Need To Know
Before you rst experience your Kick Scooter TRACER STREET, please read the USER MANUAL thoroughly and learn the basics to ensure your safety and the safety of others.
WARNING! Failure to follow the basic instructions and safety precautions listed in the USER MANUAL, can lead to damage to your scooter, other property damage,
serious bodily injury, and even death.
2.4. LCD Display
1. BATTERY: Displays an estimate of the battery strength that remains before
requiring a recharge. A fully charged battery (100%) will show 5 bars. Please
remember to charge your battery when it is on it's last bar. As the battery
depletes, the strength of the motor will get weaker.
2. GEAR: The gear can be toggled from Gear 1 to Gear 3, by pressing on SPEED.
Each gear setting will give a dierent level of acceleration and maxium speed.
Gear 1: Slow Acceleration. Gear 2: Medium Acceleration. Gear 3: Fastest Acceleration.
3. SPEED: This serves as a Speed Meter which will display the current speed you
are travelling at, in KM/H.
4. DISTANCE: This serves as an ODOMETER that keeps track of the total distance
accumulated on the Kick Scooter TRACER STREET.
5. TIME: Shows how long the scooter has been turned on for.
6. VOLTAGE: Displays the current battery voltage.
7. OPTIONAL BUTTON: Not used in the EU Region
2. Product Description
2.1. Assembly
The Kick Scooter TRACER STREET can be assembled within 2 minutes:
• Install the Handlebars.
2.2. Folding
The Kick Scooter TRACER STREET can be folded in a few seconds at the press of a
single lever.
2.3. Unfolding
You can unfold the Kick Scooter TRACER STREET without any inconvenience in seconds.
Helmet
Ellbow Pads
Knee Pads
3. Operating Principles
3.1. Operation
• Hold the ON/OFF Button for 2 Seconds to turn the scooter OFF or ON.
• Pressing the SET Button for 0.5 Seconds will show dierent display settings:
TRIP: Current mileage accumulated; ODO: Total accumulated mileage since riding the Kick Scooter TRACER STREET.
3.2. How to ride your Kick Scooter TRACER STREET
• Switch on the Kick Scooter TRACER STREET.
• Stand with a foot on the footboard.
• Manually kick the scooter forward for initial speed (the motor will not engage from a standing start).
• The accelerator lever is located below the LED screen, press the lever down to accelerate and release to decelerate.
• The hand operated front brake is located on the handle bars, press the lever down progressively to deccelerate.
• The foot operated rear brake is activated by applying progressive pressure with your foot.
3.3. PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY
Step 1: Getting Started
Take your Kick Scooter TRACER STREET out of the box and place it at on the oor.
Step 2: Charging your Kick Scooter TRACER STREET
Make sure the Kick Scooter TRACER STREET is fully charged before your initial use. For charging instructions, please follow details in Section 8 under Battery
and Charging Specications.
Step 3: Wear all proper safety gear, including, but not limited to a helmet, knee pads, elbow pads, and wrist guards.
1
SET
ON / OFF
LIGHT7 SPEED
2 3
456
1 2 3 4
1 2 3 4