The display lights up after 10 seconds, long press M (3 seconds) access the data
cancellation interface i, short press M to cancel the travel mileage (TRIP), the driving time
(TRIP TIME), the average speed (AVG) and maximum speed (MAX). Then display the
conrmation window, press M again to delete all the listed items. The display will return to the
driving interface if no operation is performed within 10 seconds.
The display can warn of the bike failure, if a failure is detected, the display interface will show
the error code. Interface shown as below:
Reset data
Error information
Motor error Communication error Motor phase error Current sensor error Accelerator error
To Next Page
Loading...
