Do you have a question about the ICP GNE125J20A1 and is the answer not in the manual?
Brand | ICP |
---|---|
Model | GNE125J20A1 |
Type | Gas Furnace |
Fuel Type | Natural Gas |
Input BTU | 125, 000 |
AFUE | 80% |
Ignition Type | Hot Surface Ignition |
Vent Size | 4 inches |
Stages | Single Stage |
Heating Capacity | 125, 000 BTU |
Lists the model numbers for the furnaces.
Covers gas type, transformer size, manifold pressure, and pilot orifice.
Specifies flue outlet size and standard outlet temperature.
Details thermal sensors, limit control settings, and pressure switches.
Information on kits for converting gas type or for high altitude.
Air delivery data (CFM and L/S) for specific NTC/GNE/NTN/NNE furnace models.
Air delivery data (CFM and L/S) for specific NDN/GDE furnace models.
Explains the fan control module and its settings.
Shows field connections and electrical safety warnings.
Illustrates the electrical circuit logic for the furnace.
Visual representation of the NTC6/GNE and NTN6/NNE furnace components.
Part numbers for heat exchangers, blower wheels, and motors.
Part numbers for pilots, orifices, manifolds, and gas valves.
Part numbers for limit switches, pressure switches, and fan controls.
Visual representation of the NDN6/GDE furnace components.
Part numbers for heat exchangers, blower wheels, and motors.
Part numbers for pilots, orifices, manifolds, and gas valves.
Part numbers for limit switches, pressure switches, and fan controls.