To Next PageTo Next Page
Need help?Do you have a question about the ICP SUPREME FEM18-M2401AM-A and is the answer not in the manual?
Explains the meaning of DANGER, WARNING, and CAUTION labels used in the manual.
Homeowner responsibilities, furnace use if submerged, flammables, filter checks, technician explanation, service info.
Precautions to prevent pipe freezing during cold weather shutdowns.
Requirements for furnace placement, level installation, clearances, and ambient temperature.
Specifies required clearances for the unit and ducts from combustible materials.
Describes different installation orientations: Upflow, Downflow, and Horizontal.
Details power supply, wiring, grounding, and wire replacement for the furnace.
Instructions for thermostat installation, including location and wiring.
How to adjust a thermostat's heat anticipator for comfort and economy.
Guidelines for duct sizing, insulation, and filter installation.
How to adjust blower speed for heating/cooling modes based on performance tables.
General warnings for installing accessories like humidifiers or air cleaners.
Specifics on wiring accessories like humidifiers and electronic air cleaners.
Requirements for heat pump use to prevent simultaneous element operation.
Pre-start checks and instructions on how to turn on the furnace.
Explains the sequence of operations for heating and cooling modes.
Describes the function of manual controls like pilot light and circuit breaker.
Procedures to verify airflow and temperature rise for optimal performance.
Detailed steps for conducting the supply air temperature rise test.
Recommends replacing the air filter twice a year and its performance impact.
States the blower motor is permanently lubricated and needs no oiling.
General
