To Next PageTo Next Page
Need help?Do you have a question about the ICP SUPREME FEM20-M2401AM-A and is the answer not in the manual?
Explains the meaning of DANGER, WARNING, and CAUTION labels used in the manual to identify hazard levels.
Outlines homeowner responsibilities, safety precautions for water exposure, and storage of flammable materials.
Provides essential precautions to prevent pipe freezing and water damage during cold weather shutdowns.
Details requirements for furnace placement, level installation, and maintaining clearances from combustibles.
Specifies minimum safe distances required between the furnace unit and surrounding combustible materials.
Explains how to configure the furnace for upflow, downflow, or horizontal installation positions.
Covers power supply, wiring, grounding, and wire type requirements for the furnace's electrical system.
Guides on selecting, installing, and wiring a thermostat for proper furnace temperature control.
Details how to adjust the heat anticipator on thermostats for optimal heating comfort and economy.
Guidance on sizing air ducts and selecting appropriate filters for optimal airflow and furnace performance.
Instructions for adjusting blower speeds based on heating/cooling output and duct system static pressure.
Procedures for installing optional accessories like humidifiers or electronic air cleaners with the furnace.
Lists essential checks and steps required before initial furnace start-up.
Describes the step-by-step sequence of operation for both heating and cooling modes.
Explains the function and usage of manual controls like switches, breakers, and indicator lights.
Details methods to verify airflow and conduct temperature rise tests for proper furnace operation.
Step-by-step guide for performing the supply air temperature rise test to ensure correct operation.
Instructions for checking the high-limit thermal protectors for proper function.
Recommendations for air filter replacement frequency and the impact of dirty filters on system performance.
Information regarding the lubrication requirements for the blower motor.
General
