2
© 2024 ICS, Oregon Tool, Inc. Specications and pricing are subject to change without notice. REV07102024 - p/n 646325
Introduction
Welcome to the ICS family and thank you for choosing ICS equipment.
At ICS we are driven to ensure you are completely satisfied with your product and
continually strive to improve our product line so that we can oer you the best
possible equipment in the industry.
This operator’s manual is a critical document that provides pertinent information
regarding the safety, operation, maintenance, and care of your new equipment. Be
sure to read and fully understand this operator manual before operating machine. Keep
this manual available at all times. Operate the equipment and all of its components
according to this manual. Failure to comply with and understand the following safety,
operation and maintenance instructions can result in serious injuries and/or death. All
operators must be properly trained or supervised by experienced personnel prior to
using this saw and should understand the risks and hazards involved. ICS discourages
improper or unintended equipment usage and cannot be held liable for any resulting
damages. Equipment modifications should be made by ICS to ensure safety and design.
Any modifications made by the owner(s) are not the responsibility of ICS and void all
equipment warranties if a problem arises as a result of the modification. Refer to the ICS
Parts List for additional information and part diagrams. Refer to the engine manufacturer
as the primary source for all safety, operations, and maintenance instructions regarding
the engine. Prior to operating, record the saw’s serial number, and the engine’s model and
serial numbers in Appendix D.
INTRODUCTION
Table of contents
Specifications Pages 3 - 5
Quick Reference Guide Page 6
Terminology Page 7
Labels & Warnings Pages 8 - 9
Safety Pages 10 - 19
Operation Pages 20 - 23
Daily Maintenance Page 24
Troubleshooting Pages 25 - 26
Appendix Page 27
To Next Page
Loading...
