Distribution Series 3 Dual Bus
855-314-002_Rev2.0_Instruction Manual
SAFETY GUIDELINES
Principles of Safe Operation and Maintenance
Safety must always be the top priority of all personnel involved in the
installation, operation, and maintenance of this unit as it operates at high
voltages that could be potentially lethal. Technicians must adhere to the
appropriate standards and manufacturer’s recommendations to minimize
hazards.
Do not attempt to perform the tasks described in this manual if you are not
a qualified professional.
It is essential that all safety devices and emergency response systems be
fully operational and within their certification periods before starting any
service.
Visual Communication
This manual uses extensive visual aids and tries to adhere to ANSI and ISO
safety symbol standards. These symbols describe the following situations:
WARNING indicates a hazardous situation that, if not avoided,
may result in death or severe injury or damage to equipment and
property.
CAUTION indicates a hazardous situation that, if not avoided,
may result in minor or moderate injury or damage to equipment
and property.
NOTICE indicates practices not related to physical injury but may
result in equipment damage, environmental hazards, loss of data,
and other undesirable consequences.
Risk of serious personal injury or damage to equipment and
property. Always observe the following:
• Installation must be done by qualified technicians.
• Shut off or disconnect all DC power sources before
connecting or disconnecting wiring.
• Carefully observe wiring polarity when making input and
output connections.
• Securely tighten all connections.
• Do not attempt to service any internal parts. Refer all product
service to an authorized ICT Ltd. service facility.
To Next Page
Loading...
Need help?
General
