Installation
• Before starting the installation of IB-872-i3, please make sure that your
computer is unplugged from the power supply.
• Open the PC case and remove the cover of your free 3.5" slot
on the front side.
• Now push the IB-872-i3 card reader with the USB cable first into the
3.5" slot until the front panel of the IB-872-i3 is on the same level as the
front panel of your PC.
• Fix the card reader IB-872-i3 to your PC with the screws supplied.
• Plug the 20 pin USB 3.0 connector of the integrated cable into the
USB 3.0 20 pin connector on your mainboard.
• Close the PC case and reconnect your
computer to the power supply.
Manual IB-872-i3
To Next Page
Loading...
Need help?
General
