Specifications
Environmental
This product is to be used in an indoor environment.
Operating temperature: 0ºC to 50ºC, 5 to 95% relative humidity, non-Condensing
Shipping: -40ºC to 70ºC, 5 to 95% relative humidity, non-Condensing
Storage: -10ºC to 60ºC, 5 to 95% relative humidity, non-Condensing
Electrical
Supply Voltage: +24VDC ±10%
Power Consummation: < 2 Amps, Triple track reading & writing High Coercivity
Power Adaptor: External switched power 24V/2.5 Amp regulated, 2.1mm
power jack, center Positive.
Interface & Cable RS232C: 6.0’ cable, DB-9 female connector with a 2.1 mm
power jack in the DB-9 housing.
USB: 6.0’ cable, Serial A Plug with a 2.1 mm power jack in a
pigtail extension to the cable.
Mechanical
Dimensions (H X W X L): 2.64” X 2.52” X 8.03” (6.7cm X 6.4cm X 20.4cm)
General Construction: Die cast metal housing (Zamac) or molded plastic
Media thickness: 0.007” to 0.045 or (0.020 to 0.065” special order)
Media length: 3.38” maximum for reading after writing operation
Cable Color: Beige or Black
Performance
Supports Formats ISO -7811 & AAMVA
Media Densities 75 bpi, 210 bpi
Media Coercivity 250 to 4200 Oersted
Media Speed Read 5 - 55 IPS
Write 5 - 35 IPS
Write (encoding) Meets or exceeds ISO 7811 requirement for new cards.
Reading Low Amplitude: >30 % @210 bpi, >40% @75 bpi
Durability
MTBF: 160,000 POH for a fully configured unit
Card Swipes: 1,000,000 swipes (with proper maintenance)
Agency Approvals
FCC Class A, CE Class A
To Next Page
Loading...
