EasyManua.ls Logo

Ideal AKE AKV Series - User Manual

Ideal AKE AKV Series
168 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Betriebsanleitung
KÜHLVITRINEN
Original
21A

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Ideal AKE AKV Series and is the answer not in the manual?

Summary

GENERAL INFORMATION AND SAFETY

FOREWORD

Introduction to the operating manual and product features.

FLEXIBILITY

Details on configuration options, designs, and sizes for display cases.

HEIGHTS

Information on different height dimensions of the display cases.

INSTALLATION VARIATIONS

Overview of various installation types like drop-in, slide-in, etc.

SCOPE OF APPLICATION

Defines models covered by the manual and their designations.

WARRANTY AND LIABILITY

Outlines conditions for warranty claims and manufacturer liability.

MANUFACTURER; SUPPORT

Contact details and information for the manufacturer and support.

FURTHER CONTACT DETAILS FOR ENQUIRIES;REPAIR

Additional contact points for technical support and repairs.

SYMBOLS AND SIGNAL WORDS USED

Explains safety symbols and signal words for hazard communication.

IDENTIFICATION

Details on how to identify the unit using rating plates and markings.

GENERAL SAFETY INSTRUCTIONS

Essential safety precautions for operating the unit.

INTENDED USE

Defines the proper and improper uses of the refrigerated display cases.

TARGET GROUP AND PRIOR KNOWLEDGE

Specifies personnel qualifications and required knowledge for operation.

REASONABLY FORESEEABLE MISUSE

Lists prohibited uses of the unit to prevent hazards.

INFORMATION REQUIREMENTS (EU) 2019;2024, (EU) 2019;2015

Compliance information related to EU regulations.

RESIDUAL DANGERS

Identifies potential risks that remain despite safety measures.

PERSONAL PROTECTIVE EQUIPMENT

Lists required PPE for installation, maintenance, and cleaning.

TRANSPORT AND PACKAGING

Guidelines for safe transport and packaging of the units.

DISPOSAL

Procedures and warnings related to the disposal of refrigerants and components.

TECHNOLOGY

EXPLANATION OF TERMS FOR COMPONENTS

Identifies and describes the parts of the display case.

TECHNICAL SPECIFICATIONS

Lists key technical data and specifications of the units.

SAFETY INSTRUCTIONS ON THE UNIT

Safety markings and instructions affixed directly to the unit.

ELECTRICAL INFORMATION

Details regarding electrical connections, safety, and power supply.

REFRIGERATION-RELATED INFORMATION

Technical details about the refrigeration system and its components.

ASSEMBLY AND INSTALLATION GUIDE

General guidance for assembling and installing the unit.

FIRST STEPS

Initial actions required for unit setup and installation.

INSTALLATION OF THE UNIT ABOVE 2000 M ABOVE SEA LEVEL

Specific instructions for high-altitude installation.

INSTALLATION OF CONTROLLER HOUSING

Procedures for installing controller housings.

STÖRK CONTROLLER (ST501, ST200 F)

Details on the STÖRK controller models and their functions.

CAREL CONTROLLER (PJ EZ; PJS2 C)

Details on the CAREL controller models and their functions.

CONDENSATE DISPOSAL

Methods and instructions for handling condensate.

VENTILATION AND DISCHARGE

Guidelines for proper air circulation and exhaust.

DEFROSTING OPTIONS

Explains automatic and manual defrosting features.

OPERATION AND USE

INITIAL START-UP

Steps for the first-time operation of the unit.

SWITCHING THE UNIT ON

General procedure for powering on the unit.

STÖRK BUTTON ASSIGNMENT (ST501, ST200 F)

Describes button functions for STÖRK controllers.

CAREL BUTTON ASSIGNMENT (SPECIAL CONTROLLER PJ EASY; PJS2)

Describes button functions for CAREL controllers.

UNITS WITH REFRIGERATED BASE

Specific operating instructions for units with a refrigerated base.

SETTING THE TEMPERATURE

Guide on how to adjust the unit's temperature settings.

SENSOR CALIBRATION

Procedures for calibrating temperature sensors.

STOCKING THE UNIT AND ADJUSTING THE HEIGHT OF THE SHELF

Guidance on product placement and shelf adjustment.

STACKING LIMITS; OUTLINE DRAWINGS

Visual guides showing weight limits per shelf and unit dimensions.

STOCKING EXTENDABLE DRAWERS AND CAKE DRAWERS

Specific instructions for stocking drawers and cake compartments.

STOCKING THE REFRIGERATED BASE

Guidance for stocking items in the refrigerated base section.

ADJUSTING THE HEIGHT OF THE SHELVES; BASE DECKS

Instructions for modifying shelf and base deck heights.

FAULTS AND CAUSES

Troubleshooting guide for common unit malfunctions.

STATUS DISPLAYS AND ERROR MESSAGES ON THE DISPLAY (STÖRK)

Explanation of error codes and status indicators.

CLEANING;MAINTENANCE;SERVICING

CLEANING AND CARE

General guidelines for maintaining cleanliness and appearance.

CLEANING INTERVALS

Recommended schedule for various cleaning tasks.

CLEANING AGENTS

Specifies permissible cleaning agents for different components.

CLEANING THE EVAPORATOR

Detailed steps for cleaning the evaporator unit.

CLEANING THE GLASS

Instructions for cleaning glass panels, covers, and doors.

CLEANING THE CONDENSER

Procedures for cleaning the condenser unit to maintain efficiency.

CLEANING THE NIGHT ROLLER BLIND

Instructions for cleaning the night roller blind feature.

CLEANING THE REFRIGERATED BASE

Specific cleaning steps for the refrigerated base section.

CLEANING THE CUTTING BOARD

Steps for cleaning the removable cutting board.

CLEANING THE BOTTLE SLIDER (FLEXROLLER)

Instructions for cleaning the bottle slider mechanism.

CLEANING HINGED HOT GAS CONDENSATE EVAPORATION

Cleaning procedures for hot gas condensate systems.

CLEANING THE ELECTRIC CONDENSATE TRAY (OPTIONAL ACCESSORY)

Cleaning for electric condensate trays.

CLEANING THE DRAIN PIPE (INCLUDING SIPHON)

Steps for flushing and cleaning drain pipes and siphons.

MAINTENANCE INFORMATION

General importance and recommendations for unit maintenance.

MAINTENANCE AND SERVICE INTERVALS

Table detailing recommended maintenance frequencies.

CHECKING THE GAS DAMPERS

Procedure for inspecting and maintaining gas dampers.

CHECKING THE REFRIGERATION CIRCUIT

Guidance on inspecting the refrigeration system.

PURCHASING SPARE PARTS

Information on how to order replacement parts.

DECLARATION OF CONFORMITY

DECLARATION OF CONFORMITY MRL 2006;42;EG

Official declaration of product compliance with relevant directives.

Ideal AKE AKV Series Specifications

General IconGeneral
BrandIdeal AKE
ModelAKV Series
CategoryDisplay Case
LanguageEnglish

Related product manuals