Form Number TM61310 Rev 2 Aug 2007
Page 7
Re
Required equipm le B. If the recommended models are not available,
equipment with equivalent specifications may be used.
Repa performed only b
Table
E Characteristics ended Model
quired Equipment
ent is listed in Tab
irs or servicing should be y qualified personnel.
B. Required Equipment
quipment Required Recomm
Calibrator
AC Voltage Range: 0
~
Accuracy: ±0.07% (Bas
uency Range: 40
~
Accuracy: ±2%
DC Voltage Range: 0
~
Accuracy: ±0.006% (Basic)
Current Range:
Accuracy: A sic)
DC: ±0.02
Frequency Source:
Accuracy: ±
Amplitude: 0.5V p-p 1.0V p-p (square wave)
Accuracy: ±
Resistance R
racy: ±
Capacitance
Accuracy: ±
Fluke 5500 or Wavetek
0 Calibrator or
equipment
750V AC
ic)
910
Freq 1KHz
1000V DC
0
~ 10A
C (40Hz to 1KHz): ±0.08% (Ba
% (Basic)
5.00Hz
~ 100MHz
0.001%
~
5%
ange: 1Ω
~ 100MΩ
Accu 0.03% (Basic)
Range: 1pF
~ 10mF
0.10% (Basic)
To Next Page
Loading...
