IDEAL 4305

- 15 -
Changing the blade must be done
from the front of the machine:
Move the blade lever (A) up and secure it.
Lift front guard (C) and remove 2 blade
screws on the elongated holes (Q).
(Found in the tool set).
•
Blade and cutting stick replacement
• •
ϦϴϜδϟ΍ ϝ΍ΪΒΘγ΍
ΔϨϴϛΎϤϠϟ ΔϴϣΎ
ϣϷ΍ ΔϬΠϟ΍ ϝϼΧ Ϧϣ:
δϟ΍ ω΍έΫ ϊϓ
ήΑ ϢϗϦϴϜ (A) ϰϠϋϷ΍ ϰϟ·
ϊοϮϟ΍ ΍άϫ ϰϠϋ ϪΘϴΒΜΗϭ .ΩϮΟϮϤϟ΍ ˯Ύτϐϟ΍ ϲτΑ Ϣϗ
ϡΎϣϷ΍ ΔϬΟ (C) ϰϟ·ϰϠϋϷ΍ .ΝήΧ΃ϦϴϜδϟ΍ ϱέΎϤδϣ
ΔϘϴϤό
ϟ΍ ΏϮϘΜϟ΍ ϞΧ΍Ω Ϧϣ (Q) ϢϬΗέ΍Ω· ϖϳήρ Ϧϋ
ΝέΎΨϟ΍ ϰϟ· .
)ΩϷ΍΍ϞϤόϟ΍ Ε΍
ϭΩ΃ ΔϋϮϤΠϣ ϦϤο ΓήϓϮΘϣ Γ(