IDEAL 4305

- 25 -
•
Maintenance and cleaning
• •
The blade lever (A) should never fall
automatically. If necessary tighten the
hexagon screw. Remove the cover (K),
remove the two screws (P) on the cover
(1.).Close the clamp (2.). Release the blade
lock (3.) and move the blade lever slightly to
the left (4.). Remove the cover (5.).
If required:
Turn the screw for blade depth adjustment (E)
to the right. If the setting on the adjustment
screw is altered then it must be turned back
to its original position or the blade depth
adjustment must be readjusted.
(see page 22)
ϦϴϜδϟ΍ ω΍έΫ ςϘ
δϳ ϥ΃ ΐΠϳ ϻ)A (ϞϔγϷ΍ ϰϟ· Ύ
˱
ϴ΋ΎϘϠΗ.
ήϣϷ΍ ϡΰ
ϟ ΍Ϋ· Δϴγ΍Ϊγ ΔϟϮϣΎλ ϡ΍ΪΨΘγ΍ ϢΘϳ .ϼϏ Δϟ΍ίΈΑ Ϣϗϑ
˯Ύτϐϟ΍)K:(
ϦϳέΎϤδϤϟ΍ Ϛϔ
Α Ϣϗ)P ( ΔϴτϐΘϟ΍ ˯ΎτϏ ϰϠϋ ϦϴΘΒΜϤϟ΍
ΝέΎΨϟ΍ ϰϟ· ϢϬ
ϔϟ ήΒϋ)1 .(.ςϐπϟ΍ Γ΍Ω΃ ϖϠϏ΃.
)2 (. ϦϴϜδϟ΍ Ϊη ϊοϮϣ
ήϳήΤΘΑ Ϣϗ)3(.
έΎδϴϟ΍ ΔϬΟ ϰϟ·
˱
ϼϴϠϗ Ϧϴ
Ϝδϟ΍ ω΍έΫ ϊο) 4(.
˯Ύ
τϐϟ΍ ϑϼϏ ϊϠΧ΍ ϢΛ) 5.(.
ήϣϷ΍ ϡΰϟ ΍Ϋ
·: ϦϴϜδϟ΍ ϖϤϋ ςΒο Γ΍Ω΃ ϒϠΑ Ϣϗ
΍ ϮΤϧ ϦϴϤϴϟ)E(ˬϦϴϜδϟ΍ ςΒο Γ΍Ω΃ ϥΎϜϣ ήϴϴϐΗ ϢΗ ΍Ϋ· ˬ
ΓΩΎϋ· ϭ΃ ϲγΎγϷ΍ ΎϬ
όοϭ ϰϟ· ϯήΧ΃ Γήϣ ΎϬΗΩΎϋ· ά΋ΪϨϋ
ΐΠϳ
ϯή
Χ΃ Γήϣ ϦϴϜδϟ΍ ϖϤϋ ςΒ
ο.
) ΔΤ
ϔμϟ΍ ήψϧ΍35.(
22