IDEAL 4810-95 User Manual

C

•
Operation
•
IDEAL 4810-95 • IDEAL 4850-95/EP • IDEAL 5221-95EP • IDEAL 6550-95EP
D
A
B
Position the main switch to "I" (A). Insert the
key for the control system and move it to the
right (B). Open the safety guard (C). The
machine is now ready for use.
Only IDEAL 4850-95EP, IDEAL 5221-95EP,
IDEAL 6550-95EP
Press
S
button (D).
Machine will automatically go to the start
position.

IDEAL 4850-95EP, IDEAL 5221-95EP,
IDEAL 6550-95EP
B
The measurement is set either with the hand-
wheel (A) or by programming (B) the cutting
measurements. Measurement is shown on the
display in inches or cm (B).
A
- 16 -
http://www.monomachines.com
http://www.monomachines.com

IDEAL 4810-95 Specifications

General

Brand	IDEAL
Model	4810-95
Category	Cutter
Language	English