•
Possible malfuntions
•
IDEAL 4810-95 • IDEAL 4850-95/EP • IDEAL 5221-95EP • IDEAL 6550-95EP
IDEAL 4850-95EP, IDEAL 5221-95EP,
IDEAL 6550-95EP
Cut cannot be made.
•
Measurement has not been reached
correctly.
•
LED "S"
X
does not turn off.
Push the
SS
SS
S
button again.
Check the security cover (see page 42).
•
Measurement below 9 cm/3,54 inch
Hold the
SS
SS
S
button
O
until the
measurement is achieved.
•
Backgauge
I
does not move and "AB "
is shown on the display.
..
..
.
Open the clamp
E
Turn the hand wheel to the left as far as
possible.
•
Backgauge
I
does not advance to position
(Hand-wheel has been turned to the left).
"
AB " is shown on the display.
inform service people.
None of the above mentioned methods
helped to solve the problem:
Contact Service Team under
•
www.ideal.de "Service"
service@krug-priester.com
- 46 -
To Next Page
Loading...
