F
• Maintenance and cleaning •
Grease the remaining parts twice a year
(see picture).
The main switch must be on "0" (B).
Disconnect from the mains.
Remove the front upper housing (E)
taking
care of the cable.
Remove lower panel and rear wooden panel
(C). Tools in tool set.
• Check oil (F). If oil is below minimum
contact your dealer.
• Remove any paper.
• Grease the machine.
• Check the 4 joining bolts and 2 pushing
bars for wear (D). If necessary inform your
service personnel.
• Mount the machine.
With more than 5 hours of use per day, the
service must be performed more often.
To Next Page
Loading...
