IDEAL 7260 - Page 48

- 48 -
A
• Technical data •
Technical data:
•
Power supply:
400 V, 3P+N+PE
220 V, 3P+PE
•
Cutting length: 720 mm
•
Cutting height: 80 mm
•
Table depth: 720 mm
•
Sound level EN 13023: 72 dB (A)
•
Minimum space requirement
(width x depth x height)
1305/2100
1
mm x 1540/1600
1
mm x 1335 mm
•
Leakage current < 3,5mA
•
Power cord gauge:
400 V: 5 x 1,5 mm
2
, 16 A
220 V: 4 x AWG 14, 20 A
• Clamping pressure: min. 250 daN,
max 2000 daN
• Weight: 588 kg, 628 kg
1
• Capacity of hydraulic oil: 1,5 l
HLPD, viscosity 46 mm
2
/ sec. to DIN 51562.
Used oil must be disposed of at the
authorised place.
1
with side tables
The exact technical specications can be
found on the technical specications sticker
(A) on the machine. A wiring diagram is found
in the electrical switch box.
To claim under guarantee, the machine must
still carry its original identication label.
Safety light beam
• Total reaction time: 120 ms
• Resolution 14 mm/minimum distance: 250 mm
• Resolution 24 mm/minimum distance: 320 mm
• Resolution 39 mm/minimum distance: 440 mm
Ambient operating temperature 10 °C - 60 °C
Air humidity (not condensating) 15 % - 95 %