IDEAL IMAX XTRA E80

USER GUIDE
IMAX XTRA
E80 E120 E160 E200 E240 E280
For Installation Guide see reverse of book
When replacing any part on this appliance, use only spare parts that you can be
assured conform to the safety and performance specification that we require.
Do not use reconditioned or copy parts that have not been clearly authorised by Ideal.
For the very latest copy of literature for specification and maintenance practices visit our website
www.idealcommercialboilers.com where you can download the relevant information in PDF format.

IDEAL IMAX XTRA E80 Specifications

General

Brand	IDEAL
Model	IMAX XTRA E80
Category	Boilers
Language	English

Summary

Safety

Gas Safety Regulations

Legal requirements for installation and maintenance by certified professionals.

Electricity Supply

Requirements for electrical connection, voltage, fusing, and switch type.

Important Notes

Minimum Clearances

Lighting the Boiler

Boiler Controls and Display

Control Panel Overview

Identification of buttons and displays on the master control panel.

Boiler Operation Sequences

Table detailing boiler status codes and their meanings.

Blocking and Error Modes

Explanation of boiler blocking states and error code display.

Self Check and Anti-Seize

Description of automatic system checks and pump anti-seize function.

Burner OnOff Switch

Function and limitations of the burner on/off switch.

CHDHW System Control

How to manually turn CH and DHW systems on/off via buttons.

Water Temperature and System Types

Adjustable Parameters

Overview of adjustable settings like DHW temp, DHW system, CH system, and flow temp.

Parameter Setting Procedure

Steps to enter parameter mode, select, and store new settings.

Boiler Shutdown and Protection

Shutting Down the Boiler

Procedures for short and long-term boiler shutdown.

Relighting the Boiler

Instructions for relighting the boiler after draining the system.

Frost Protection

Description of the boiler's built-in frost protection feature.

Boiler Overheat Handling

Procedure for dealing with boiler overheat fault (E18).

Condensate Drain Management

Information on condensate drain blockage and freezing.

Escape of Gas Procedure

Action to take in case of suspected gas leak or fault.

Cleaning Instructions

Guidelines for cleaning the boiler using dry or damp cloths.