IDEAL INSTINCT 150

INSTALLATION
AND SERVICING
40 60 80 100 120 150
40P 60P 80P
For Users Guide see reverse of book
When replacing any part on this appliance, use only spare parts that you can be
assured conform to the safety and performance specification that we require.
Do not use reconditioned or copy parts that have not been clearly authorised by Ideal.
For the very latest copy of literature for specification and maintenance practices visit our website
www.idealcommercialboilers.com where you can download the relevant information in PDF format.
March 2016
UIN 214128 A01

IDEAL INSTINCT 150 Specifications

General

Brand	IDEAL
Model	INSTINCT 150
Category	Boiler
Language	English

Summary

General Information and User Guide

Introduction

Overview of the Instinct Heat boiler's features and design.

Safety and Regulations

Key safety instructions and compliance with gas regulations.

Electricity Supply

Requirements and connection details for the boiler's electrical supply.

Boiler Controls and Display

Explanation of the boiler's control interface and operating modes.

Basic Operating Instructions

Guidance on setting flow temperature and operating modes.

Installation Procedures

Boiler Clearances and Connections

Required clearances for boiler installation and connection points.

System Requirements

Details on open vented and sealed system requirements.

Flue System Installation

Guidance on selecting and installing flue kits and accessories.

Flue Termination Positions

Specifications for safe and compliant flue terminal positioning.

Servicing and Maintenance

Servicing Schedule

Recommended intervals and procedures for regular boiler servicing.

Component Replacement

Procedures for replacing key components like the burner and fan.

Heat Exchanger Cleaning

Instructions for inspecting and cleaning the heat exchanger.

Fault Finding and Troubleshooting

Fault Finding Chart Overview

Navigating the main fault finding diagnostic menu.

Ignition and Flame Faults

Troubleshooting issues related to ignition and flame detection.

Thermistor and Sensor Faults

Identifying and resolving issues with flow/return thermistors and sensors.

No Heating or Hot Water

Troubleshooting scenarios where heating or hot water is not functioning.