28
You can choose to display time or handset name in your idle screen.
1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select HS DISPLAY.
3. Press <MENU/OK> and <UP/DOWN> to select HANDSET NAME or TIME
.
4. Press <MENU/OK> to confirm.
7.3.8 Set the Auto Answer
If you turn on the Auto Answer, you can answer a call automatically by just lifting
1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select AUTO ANSWER.
3. Press <MENU/OK> and <UP/DOWN> to turn on or off the auto answer feature.
4. Press <MENU/OK> to confirm.
the handset off the base or charger, without having to press any key.
7.4 Base Settings
1. Press <MENU> and <UP/DOWN> to select BS SETTINGS.
2. Press <OK> and <UP/DOWN> to select BS RINGER.
3. Press <OK> and <UP/DOWN> to select the desired melody you want from a
Note: The respective ringer melody will be played while browsing the melody list.
Press <OK> to confirm.
7.4.1 Set the Base Ringer Melody
4.
choice of 5.
1. Press <MENU> and <UP/DOWN> to select BS SETTINGS.
2. Press <OK> and <UP/DOWN> to select RING VOLUME.
volume levels including VOLUME OFF).
Note
: The respective ringer volume will be played during your selection.
4. Press <OK> to confirm.
7.4.2 Set the Ringer Volume
6 ringer
3. Press <OK> and <UP/DOWN> to select the desired ringer volume (a total of
Note: If TIME is selected, but no time has been set the display will show ----------.
7.3.7 Choose the Information to be Displayed in Idle
To Next Page
Loading...
