To Next PageTo Next Page
Need help?Do you have a question about the iDect X2i System and is the answer not in the manual?
General| Brand | iDect |
|---|---|
| Model | X2i System |
| Category | Cordless Telephone |
| Language | English |
Alerts users that the phone is not designed for emergency calls during power failures.
Identifies and explains the function of all buttons and indicators on the handset and base unit.
Step-by-step instructions for connecting the base unit, power, and telephone line.
Instructs users to fully charge the handset batteries for 15 hours before first use.
Outlines critical safety measures regarding water, electricity, and lightning.
Detailed steps for adding new contact names and numbers to the phone book.
How to make intercom calls, end them, and manage basic multi-handset functions.
Describes the available answering machine modes and how to switch between them.
Options for using predefined or recording custom outgoing messages.
How to set the number of rings before the answering machine answers, including Toll Saver.
Guides users on how to activate the call screening feature to listen to incoming messages.
Explains status indicators and how to turn the answering machine on or off.
How to access, play, and control recorded messages, including volume and detail viewing.
Instructions for navigating, deleting current, or deleting all stored messages.
How to enable remote access to the answering machine, requiring a PIN.
Instructions for remote message playback and restoring default answering machine settings.
Initial checks and solutions for common issues like blank display, no dial tone, and incorrect connections.
Solutions for issues like locked keypad, call barring, and inability to make calls or hear rings.
Advice for when the phone experiences interference and noise on the line.
How to address calls cutting off due to range, unexpected beeps, Caller Display problems, and busy tone.
