Making and answering calls
Using the
speakerphone
The speakerphone lets you hear calls without holding
the handset to your ear.
You can switch between speakerphone and earpiece
mode during calls at any time by pressing the
PHONE/SPEAKERPHONE button. The display will show
the speakerphone icon.
To make a
call
1 Key in the telephone number
If you make a mistake, press MUTE/CANCEL to
clear digits one by one from the display.
2 Press the PHONE button
(You can dial the number after you press the
PHONE button to get Dial tone if you prefer,
but you can’t correct any mistakes if you do it
this way. If you press the PHONE button before
you dial, the display shows
Calling.)
To answer a
call
When there’s an incoming call, the base unit and handset
ring (unless the handset’s ringer is turned off). If you
subscribe to Caller Display (see page 22) the caller’s
number or name may appear on the display; otherwise,
the display shows
<<External CALL>>.
To end a call
◗
Press the HANG UP button so that the
IN USE light on the base unit goes out
◗
Or just replace the handset on the base unit
è
The display shows Calling and the duration
of the call for 5 seconds.
14
Color profile: Disabled
Composite Default screen
To Next Page
Loading...
