The master
PIN
The Master PIN (personal identity number, or security
code) is required when handsets are registered and
deregistered, and when important changes to the
settings are made.
The default setting for the PIN is 0000. To protect your
handset’s settings, we recommend that you change it to
a four-digit number you’ll easily remember.
To change
the PIN:
1 Press the MENU button
è
The display shows Main Menu >Phonebook
2 Press the â button THREE times
è
The display shows Main Menu >Advance Set
3 Press the MENU/OK button then the â
button Four times
è
Display shows Advance Set >Change PIN
4 Press the MENU/OK button
è
Display Shows Enter PIN
5 Key in the current PIN (default = 0000) and
press the MENU/OK button
è
Display shows Enter New PIN:
6 Key in the new PIN number and press the
MENU/OK button
è
Display shows Confirm PIN:
7 Key in the PIN again and press the
MENU/OK button
è
You will hear a long confirmation beep
8 Use the CANCEL button to exit the menu or
press and hold HANG UP to go to standby
mode
Custom settings
Help Line: 0845 345 9677 (Local Call rate) 45
Color profile: Disabled
Composite Default screen
To Next Page
Loading...
