Using a multi-handset system
If you have an iDECT X2i multi-handset system, you
already have more than one handset registered to your
base unit. You can register additional handsets — up to
four per base unit. With two or more handsets, you
can:
■
make intercom calls from one handset to another
■
transfer an outside call from one handset to another
■
shuttle between an outside call and an intercom call
■
set up a three-way conference call
Each handset’s number (1 to 4) is shown on its display.
!
Only one handset can be connected to the outside
line at once. If you try to make a call while another
handset is already on the line, you’ll hear Busy tone.
To make an
intercom call
1 Press and hold the INT/# button for 2
seconds.
è
The INT symbol flashes on the display and
the numbers of the available handsets will be
displayed
INTERCOM 2 3 4
2 Press the appropriate number to select and
call the handset
è
The other handset rings, and its display
shows
Call From Handset # (with your handset
number). When the other handset user
answers, you’ll be connected.
To end an
intercom call
◗
On either phone, press the HANG UP button
or replace the unit in the base unit or
charger pod
Help Line: 0845 345 9677 (Local Call rate) 25
Color profile: Disabled
Composite Default screen
To Next Page
Loading...
