Idegis DOM-32 PH - User Manual

Details the correct vertical mounting and placement of the power supply unit.

Explains how to install the electrolysis cell, emphasizing verticality and access.

Describes the wiring scheme for connecting the electrolysis cell to the power supply.

Details how to access and modify system parameters via the control panel menu.

Details the integrated pH controller's features, calibration, and setup.

Explains the safety function that stops the dosage pump to prevent damage or issues.

Describes various alarm conditions like high/low salt levels and their remedies.

Outlines procedures for manual cleaning and care of the electrolysis cell and electrodes.

Explains the process for calibrating the pH sensor using different modes.

Guides on calibrating the ORP sensor using a reference solution.