EasyManuals Logo

Idegis DOMOTIC SERIES User Manual

Idegis DOMOTIC SERIES
188 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
21
ELECTRODES
The DOMOTIC Series system has a light indicating malfunction of the electrolysis cell electrodes [13]. This usually occurs at the
end of the electrodes ’useful life, when they lose their power. However, although this is a self-cleaning system, this malfunction
could also be due to excessive scaling on the electrodes when the system operates with hard water with a high pH value.
Fig. 31
PH / ORP OUT OF RANGE (only in models DOM-XX PH and DOM-XX PLUS)
The integrated pH/ORP control system has two ALARM lights which come on whenever a pH value of less than 6.5 “LOW” [19] or
more than 8.5 “HIGH” [16] is detected, or ORP falls outside the 600 mV “LOW” [25] - 850 mV “HIGH” [22] range. When the
regulator detects an active pH alarm, it opens the control output of the dosage pump (pH).

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Idegis DOMOTIC SERIES and is the answer not in the manual?

Idegis DOMOTIC SERIES Specifications

General IconGeneral
BrandIdegis
ModelDOMOTIC SERIES
CategorySwimming Pool Filter
LanguageEnglish

Related product manuals