iDevices SWITCH - In the Box; System Requirements; Getting Started; Unit Setup

3
In the Box
Inside your Switch box, you will nd:
• 1 iDevices
®
Switch
• 1 Quick Start Guide
System Requirements
• iPhone
®
4s and later
• iPad
®
3rd generation and later
• iPad mini™ and later
• iPod touch
®
5th generation and later
• HomeKit™ requires an iPhone, iPad, or iPod touch with
iOS 8.1 or later
• Wi-Fi
®
2.4Ghz 802.11 b/g/n compatible network
• Router Security Settings Supported: WPA, WPA2, or None
• iDevices
®
Connected app version 2.0 or higher
Getting Started
Unit Setup
• Remove the Switch from packaging.
• Note 8 digit pin located on the back of the unit and on the
Quick Start Guide.
• Plug your Switch into a grounded wall outlet.