3
Quanti-Tray
*
Sealer
Description
The IDEXX Quanti-Tray* Sealer Model 2X is a motor-driven, heated roller instrument designed to seal IDEXX Quanti-Trays (including
Quanti-Tray*/2000). This Sealer, used with Quanti-Trays and any IDEXX reagent in 100mL format, such as Colilert*, Colilert-18*, Colisure*,
Enterolert*, Pseudalert*, and HPC for Quanti-Tray*, automates the sample handling of bacterial enumeration. Together, they produce
counts as accurate as membrane filtration with the ease of a presence/absence test.
Diagram 1
Diagram 2
Contents
Each Model 2X Sealer comes with the base Sealer unit, an input shelf, one Quanti-Tray* rubber insert, one Quanti-Tray/2000
rubber insert, Most Probable Number (MPN) tables, this user manual and preventive maintenance instructions. The 115-V model
also comes with a standard U.S. three-prong grounding power cord. The 230-V model also comes with three cords: a U.K. cord,
a European/Shuko cord and a Swiss cord.
Note: Extra Quanti-Tray rubber inserts (catalog number WQTSRBR-51) and Quanti-Tray/2000 rubber inserts
(catalog number WQTSRBR-2K) are available separately.
Reverse Button Amber Power Light
Quanti-Tray
Green Ready Light
Rubber Insert
Input Slot
Input Shelf
Access Panel
Fan
Exit Slot
Product Label
Cycle Counter
(approximate counts)
Power Cord
Power Switch
Fuse Box
CAUTION: RISK OF ELECTRICAL SHOCK
Do not open the cover of this Sealer.
Do not allow water to spill into this Sealer.
Pour water samples into Quanti-Trays as described in the Quanti-Tray insert.
CAUTION: RISK OF SKIN BURNS
Your company/institution may qualify personnel for cleaning the inside of the Sealer. Qualified personnel should
refer to the preventive maintenance instructions for directions on how to clean the inside of the Sealer.
Model 2X • User Manual
English
To Next Page
Loading...
Need help?
General
