Idexx SediVue Dx User Guide

To clean the internal components (monthly or more frequently, if needed)
1. Tap the SediVue Dx
icon on the IDEXX
VetLab Station Home
screen, tap Turn off
SediVue Dx, and then
tap Shutdown.
4. Clean the left side of
the pusher arm 5 times
with an alcohol prep
pad (ensuring the right
edge of the track is
cleaned thoroughly),
and then dry it with an
optical tissue.
5. Press the pusher lever
to the left and repeat
step 4 on the right side
of the pusher arm.
6a. Using a new alcohol
prep pad, clean the
optical stage and
track repeatedly to
remove all debris.
Then dry with an
optical tissue.
6b. Using a new alcohol
prep pad, clean the
optical window in a
circular motion (3–4
times) and then dry
it in a circular motion
with a clean optical
tissue.
7. Remove the centrifuge
shield, waste bin and
drip tray. Then clean
them with warm water
and dry them with an
optical tissue.
8. Using a new alcohol
prep pad, clean the
move arm and then
dry it with an optical
tissue.
9. Return the waste bin,
drip tray, centrifuge
shield, and cartridge
holder to their
locations in the
analyzer.
10. Close the analyzer
door. On the IDEXX
VetLab Station Home
screen, tap the
SediVue Dx icon,
and then tap Turn on
SediVue Dx.
2. Open the analyzer
door and clean the
top and bottom of
the pipetting window
with an optical tissue
dampened with warm
water. Then dry with a
dry optical tissue.
3. Remove the cartridge
holder, clean it with an
alcohol prep pad, dry
it with an optical tissue,
and then set it aside.
Pusher arm
Pusher lever
Pusher arm
Move arm
Optical
stage
Track
Move arm
Optical
window
IMPORTANT: Do not exert excess pressure on the optical
window.

Idexx SediVue Dx Specifications

General

Brand	Idexx
Model	SediVue Dx
Category	Measuring Instruments
Language	English