Need help?Do you have a question about the Idexx Catalyst One and is the answer not in the manual?
General| Type | Veterinary Chemistry Analyzer |
|---|---|
| Sample Type | Whole blood, serum, plasma, urine |
| Humidity | 10% to 85% non-condensing |
| Connectivity | USB, Ethernet |
| Supported Species | Canine, Feline, Equine, Bovine |
| Weight | 22 lbs |
| Operating Temperature | 15°C to 30°C |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Display | Touchscreen |
| Sample Volume | 100 µL |
| Result Time | 8 minutes |
| Regulatory Compliance | CE |
General guidelines for safe operation and handling of the analyzer.
Precautions to ensure optimal analyzer performance and accurate results.
Recommendations for maintaining the analyzer's condition and longevity.
Information on connecting the analyzer to the IDEXX VetLab Station.
Explanation of LED indicator colors and their meanings for analyzer status.
Procedure for viewing and responding to alert messages from the analyzer.
Step-by-step guide for installing and connecting the Catalyst One analyzer.
Description of four work flows for analyzing samples on the analyzer.
Guidelines for handling CLIPs, panels, and slides during analysis.
Procedures and considerations for diluting samples for analysis.
Information on handling test values outside the reportable range.
Detailed steps for preparing whole blood and plasma samples.
Step-by-step guide for preparing serum samples.
Step-by-step guide for preparing urine samples.
Guidelines for inspecting samples for hemolysis, icterus, and lipemia.
Recommendations for storing serum, plasma, whole blood, and urine samples.
Steps for performing general quality control on the analyzer.
Step-by-step guide for cleaning internal analyzer components.
Instructions for cleaning the exterior of the analyzer and sample drawer.
To Next Page
