18
Modifying the Settings on the Analyzer
Modifying the Sound Settings
‡
The analyzer will beep when it encounters an alert. You can modify the Sound settings to turn the
sound off or adjust its volume.
1. Tap Instruments on the IDEXX VetLab Station Home screen.
2. Tap the Catalyst One side tab.
3. If you do not want the analyzer to make any sounds, tap Off in the Sound area.
OR
4. If you want the volume of the sound to be quiet, tap Low in the Sound area.
OR
5. If you want the volume of the sound to be loud, tap High in the Sound area.
Entering Standby Mode
You can modify the settings of the analyzer so that it enters Standby mode at a certain time each
day or put it in Standby mode immediately.
1. Tap Instruments on the IDEXX VetLab Station Home screen.
2. Tap the Catalyst One side tab.
3. If you do not want the analyzer to ever enter Standby mode, tap Never in the Standby area.
OR
4. If you want the analyzer to enter Standby mode at a certain time each day, tap Daily in the
Standby area and then select the desired start time from the available drop-down list.
OR
5. If you want the analyzer to enter Standby mode immediately, tap Now in the Standby area.
Exiting Standby Mode
You can set the analyzer to exit Standby mode at a certain time each day or immediately.
1. Tap Instruments on the IDEXX VetLab Station Home screen.
2. Tap the Catalyst One side tab.
3. If you want the analyzer to exit Standby mode at a certain time each day, tap Daily in the Exit
Standby area and then select the desired start time from the available drop-down list.
OR
4. If you want the analyzer to exit Standby mode immediately, tap Now in the Exit Standby area.
‡
Feature coming soon
To Next Page
Loading...
Need help?
General
