Need help?Do you have a question about the iDirect iQ 200 and is the answer not in the manual?
Target users for this manual, including installers and operators.
Overview of the chapters and sections included in this manual.
Explanation of symbols, formatting, and warnings used throughout the document.
List of related iDirect documentation available for users.
Information on training courses for iDirect products and how to register.
Contact information and resources for technical assistance and support.
Details on product compliance and warranty information.
Overview of the key features supported by the iQ 200 Rackmount Satellite Router.
Details on the different power supply configurations available for the router.
Physical dimensions, weight, and environmental operating parameters of the router.
Electrical power requirements, input voltage, and current ratings for the router.
Radio Frequency parameters, including frequency range, tuning, and power levels.
Description of the LED indicators on the front panel of the iQ 200 Rackmount Router.
Detailed meanings of the front panel LED colors and their status indications.
Identification and description of connectors and ports on the rear panel.
High-level overview of the key steps involved in installing the satellite router.
List of recommended tools and equipment needed for the installation process.
Instructions for safely unpacking and inspecting the iDirect equipment.
List of standard components included with the iQ 200 Rackmount Satellite Router.
Procedures for physically mounting the satellite router into a rack or enclosure.
Steps to configure a PC for connecting to the router's user interface.
Guidance on downloading firmware and configuring the satellite router.
Critical safety precautions to follow when performing maintenance on the router.
Basic maintenance procedures to ensure efficient operation and longevity.
Common issues and actions to resolve problems with the satellite router.
Step-by-step guide for safely removing and replacing the power module.
Instructions for properly repacking the router for shipping or storage.
Detailed instructions for preparing coaxial cables for connection.
Details on the RJ-45 pin configuration for Ethernet ports.
Procedure for connecting to the router's console port for servicing.
Basic reset function for the router, initiated by powering up or short button press.
Factory default reset; requires reloading software and configuration.
Target users for this manual, including installers and operators.
Overview of the chapters and sections included in this manual.
Explanation of symbols, formatting, and warnings used throughout the document.
List of related iDirect documentation available for users.
Information on training courses for iDirect products and how to register.
Contact information and resources for technical assistance and support.
Details on product compliance and warranty information.
Overview of the key features supported by the iQ 200 Rackmount Satellite Router.
Details on the different power supply configurations available for the router.
Physical dimensions, weight, and environmental operating parameters of the router.
Electrical power requirements, input voltage, and current ratings for the router.
Radio Frequency parameters, including frequency range, tuning, and power levels.
Description of the LED indicators on the front panel of the iQ 200 Rackmount Router.
Detailed meanings of the front panel LED colors and their status indications.
Identification and description of connectors and ports on the rear panel.
High-level overview of the key steps involved in installing the satellite router.
List of recommended tools and equipment needed for the installation process.
Instructions for safely unpacking and inspecting the iDirect equipment.
List of standard components included with the iQ 200 Rackmount Satellite Router.
Procedures for physically mounting the satellite router into a rack or enclosure.
Steps to configure a PC for connecting to the router's user interface.
Guidance on downloading firmware and configuring the satellite router.
Critical safety precautions to follow when performing maintenance on the router.
Basic maintenance procedures to ensure efficient operation and longevity.
Common issues and actions to resolve problems with the satellite router.
Step-by-step guide for safely removing and replacing the power module.
Instructions for properly repacking the router for shipping or storage.
Detailed instructions for preparing coaxial cables for connection.
Details on the RJ-45 pin configuration for Ethernet ports.
Procedure for connecting to the router's console port for servicing.
Basic reset function for the router, initiated by powering up or short button press.
Factory default reset; requires reloading software and configuration.
General| Model | iQ 200 |
|---|---|
| Type | Satellite Router |
| Forward Link | DVB-S2/S2X |
| Return Channel | Up to 7.5 Msps |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Operating Temperature | 0°C to 50°C |
| Return Link | TDMA |
| Interface | 1x 10/100/1000Base-T Ethernet port |
To Next Page
