Need help?Do you have a question about the iDirect evolution e8350 and is the answer not in the manual?
Procedure to find the Satellite Router's IP address via the console port.
Procedure to load board support and remote image packages using iSite.
Procedure to load Network Acquisition Keys (ACC Keys) for TRANSEC security.
Steps to restart Satellite Routers in factory default mode for troubleshooting.
Procedure to load remote software package files using the Web iSite interface.
Procedure for performing initial alignment of the antenna using Web iSite.
Performing a coarse alignment of the antenna using Web iSite calculated data.
Procedure to achieve peak received signal strength using Web iSite.
Instructions for initiating satellite access for cross-pol adjustment.
Procedure for adjusting antenna feed for optimal cross-pol isolation.
Steps to prepare for determining 1 dB compression point and maximum power.
Procedure to find the point where BUC amplifier gain decreases by 1 dB.
Optional steps to determine maximum transmit power using a modulated carrier.
Overview of Satellite Router's initial acquisition into the network.
Procedure for the Satellite Router to join the network for the first time.
How transmit power is controlled by the hub's Uplink Control Process (UCP).
Procedure to set initial and maximum power for TDMA remotes in iBuilder.
Procedure to set initial and maximum power for TDMA remotes in iBuilder.
Procedure to set initial and maximum power for SCPC return channels.
Tasks performed by the Network Operator after Satellite Router acquisition.
Procedure to find the Satellite Router's IP address via the console port.
Procedure to load board support and remote image packages using iSite.
Procedure to load Network Acquisition Keys (ACC Keys) for TRANSEC security.
Steps to restart Satellite Routers in factory default mode for troubleshooting.
Procedure to load remote software package files using the Web iSite interface.
Procedure for performing initial alignment of the antenna using Web iSite.
Performing a coarse alignment of the antenna using Web iSite calculated data.
Procedure to achieve peak received signal strength using Web iSite.
Instructions for initiating satellite access for cross-pol adjustment.
Procedure for adjusting antenna feed for optimal cross-pol isolation.
Steps to prepare for determining 1 dB compression point and maximum power.
Procedure to find the point where BUC amplifier gain decreases by 1 dB.
Optional steps to determine maximum transmit power using a modulated carrier.
Overview of Satellite Router's initial acquisition into the network.
Procedure for the Satellite Router to join the network for the first time.
How transmit power is controlled by the hub's Uplink Control Process (UCP).
Procedure to set initial and maximum power for TDMA remotes in iBuilder.
Procedure to set initial and maximum power for TDMA remotes in iBuilder.
Procedure to set initial and maximum power for SCPC return channels.
Tasks performed by the Network Operator after Satellite Router acquisition.
General| Brand | iDirect |
|---|---|
| Model | evolution e8350 |
| Category | Network Router |
| Language | English |
To Next Page
