44
12 CAUSES AND SOLUTIONS
GB
The following table shows the drawbacks encountered and remedies that can be made also directly from the
user.
PROBLEM CAUSES SOLUTIONS
The machine doesn’t start • Machine not connected to
the electricity grid
• Faulty electrical components
• Connect the plug to the power outlet
• Call Service
The machine does not turn
off
• Faulty components • Disconnect the plug from the power
outlet and contact the service center
The light does not turn on • Machine not connected to
the electricity grid
• Faulty light
• Connect the plug to the power outlet
• Replace the light
The fan does not work • Machine not connected to
the electricity grid
• Faulty fan
• Connect the plug to the power outlet
• Call Service
The machine vibrates a lot
and / or is noisy
• Water level in the tank
insufcient
• Faulty pump
• Fill the tank with drinking water
• Call Service
The machine turns on but
not nebulizes
• Faulty pump
• Empty tank
• Clogged hydraulic compo-
nents
• Replace the pump
• Fill the tank with drinking water
• Call Service
Nozzles not nebulize well • Clogged nozzles • Clean / replace clogged nozzles
• Call Service
Water leakage • Hydraulic circuit faulty • Check that the hydraulic hoses are con-
nected properly
• Call Service
The radio control does not
work
• The remote control has the
discharged battery
• Radio control mode off
• Change the battery in the remote control
• Repeat the process of activation of the
remote control
FOR REQUESTING SERVICE CALL NUMBER
+39 049 9335903
Copyright ©2017 Idrobase Group. All rights reserved.
To Next Page