IDROBASE AURORA - Information

28
1  APPLICATIONS
IDROBASE GROUP SRL undertakes to repair or replace free of charge any parts that have
manufacturing faults within the warranty period. Faults not clearly due to materials or
manufacturing shall be examined at one of our Technical Assistance Centres or at our
headquarters and charged according to the results. The following are excluded from the
warranty: accidental damage due to transport, negligence or inappropriate treatment, in-
correct or improper use or installation, i.e. not complying to the instruction manual, and
any situations that do not depend on machine standards and operation, or on electrical
and equipment use. The warranty is invalidated if the equipment is repaired or tampered
with by unauthorized third parties. The equipment shall not be replaced nor the warranty
extended after it has been repaired for faults. The warranty does not cover cleaning the
working parts or replacing consumable components such as pump oil, nozzle, etc.
IDROBASE GROUP SRL IS NOT LIABLE FOR ANY DAMAGE TO PERSONS OR OBJECTS DUE TO
INCORRECT INSTALLATION OR IMPROPER USE OF THE EQUIPMENT.
2.4 CONDITIONS FOR RETURNS
It will be the responsibility of the end user to return the product to the retailer; or telepho-
ne for further information to the number
+39 049 93 35 136
2.5 CASES IN WHICH THE MANUFACTURER IS NOT LIABLE
The manufacturer is not liable for damage caused by the following:
• Improper use of the machine or use by untrained people.
• Use of non genuine spare parts.
• Non-compliance with maintenance.
• Unauthorized modications or operation.
• Non-observance, in total or part, of the instruction manual.
• Non-observance, in total or part, of the safety regulation in force in the country where
the machine is used.
READ AND SAVE THESE INSTRUCTIONS
2.6 SAFETY
AURORA is well-advanced from a technical point of view and for a proper installation, good
operation, proper use and maintenance, it needs trained, responsible staff who has to
comply with the following rules of safety and conduct.
• Do NOT run the pump without water. Do not run the pump with liquids with sand or other
solid particles that compromise the efcient running of the seals;
• USE the machine outdoors ONLY coverage;
• Do NOT expose the machine to freeze and the outside weather in general. Freezing can
cause severe damages to the pump and circuit. The prolonged downtime at temperatu-
res below 5°C can cause damages or break pump and pipes, it is better to do a complete
emptying;
• You MUST follow the rules imposed by the Fire Department or by local entrusted bodies.
• The electrical system connected to the machine MUST BE made in compliance with the
laws in force in the country of installation;
• It is RECOMMENDED the presence of a differential circuit breaker, with a sensitivity of 30
mA above the socket or power plant;
GB
Copyright ©2017 Idrobase Group. All rights reserved.