IDTECH ValueScan III IDBB-4244MRB - Adding an Exclusive Suffix Code

Page | 53
2. In the second way, the prefix and suffix codes
are added. Setting codes are scanned and set
through ASCII code. The setting codes are
021100nn (suffix code) and 021600nn (prefix
code). This ASCII setting is hexadecimal. Refer
to ASCII Table 2 for specific parameters.
For example, to add the common suffix code A,
the hexadecimal setting code is 02110041; to
add the common prefix code A, the
hexadecimal setting code is 02160041.
In addition, you must add a character after the
barcode and then add Enter. To add the
character "+" after the bar code and then add
Enter, use the setting code is "0213@+\r"; the
suffix code is "0212@non-accumulative,
0213@accumulative 2 times, and
0211@accumulative 3 times.
5.2. Adding an exclusive suffix code
One type of barcode must be added with an
exclusive suffix code. For example, the Code 128
codes must be followed by the letter A; there are
two ways to do so:
1. 0211 0141
2. 0212 A A
To accumulate, use 0213A and 0211A.
See Table 1 below for explanation.
See ASCII code table 2.