IDTECH ValueScan III IDBB-4244MRB - Sleep Time Setting; Button Timeout Setting

Page | 54
Please refer to Code Table 1
for other types of
barcodes.
Likewise, to add a specific barcode with a prefix
code, all Code 128 codes are needed before the
letter A; there are two ways to do so:
1. 0216 0141
2. 0217 A A
To accumulate, use 0218A.
5.3. Sleep time setting / button timeout
setting
1. Sleep time setting code: 0310nnn.
If X seconds of sleep is required and calculated
in hexadecimal (4 for base), the formula is
x/4=NNN.
For example, if it takes 60 seconds to
automatically shut down, the setting code is
0310015.
If it takes five minutes to automatically shut
down, the setting code is 0310015.
Sleep time limit: 42 minutes and 47 seconds.
2. Button timeout setting code: 0235nn.
If the button timeout is 4S, the setting code is
023540.
See Table 1 below for explanation.
See ASCII code table 2.