iENYRID ES10 - Product Assembly and Operation; Unpacking and Initial Assembly; Adjusting Handlebar Height; Protective Gear Recommendation

2. Product assembly
1. Open the carton and take out the product
2. Straighten the frame and fixthe buckle
3. Learn to drive
1. Please wear head thieves, elbow pads and knee pads.
Please read this manual carefully before use.
3. Turn the knob to open the accelerator and start riding
Slow down by releasing the throttle
5. Triple lighting system, move the red button up and down
Three lighting modes can be adjusted
2. Start up and test
LCD Meter and power status
4. Gently hold the brake handle to slow down,
Hold the brake handle tightly for emergency braking
6. L and H two gear speeds, yellow button for left and right adjustment,
Green button switch horn
(( MADE IN CHI NA
3. Adjust the appropriate height
Fixing buckle
4. Vertical base pipe fixing buckle
5. Install the seat bag and fix the folding buckle
6. Start with key
(