IFB 25BCSDD1 - Heater Selector Functions

15
Heater Selector (Single/Double)
1. H-1 (operates with grill mode set at different temperature combination )
2. In standby mode , press HEATER SELECTOR option once. The display shows H_1
3. Place Teflon coated tawa on low rack on glass turntable.
4. Press start /express cook option to start .During this time oven preheats tawa .Grease the
tawa with oil if desired before preheating (optional) .
5. Place food on tawa and set the cooking time within a minute.
6. Press start .
7. Turn over food in-between for even browning.
1. H-2 (operates with convection mode set at temperature favorable for cooking food at high
temperature )
2. In standby mode , press HEATER SELECTOR option once. The display shows H_2
3. Place Teflon coated tawa on low rack on glass turntable.
4. Press start /express cook pad to start .During this time oven preheats tawa .Grease the tawa
with oil if desired before preheating (optional) .
5. Place food on tawa and set the cooking time within a minute.
6. Press start .
7. Turn over food in-between for even browning.
Guide to low fat frying:
Heater selector Option
Applicable for
Approx. cooking time
H1-Grill mode
Pizza
10-12 minutes
Bread toast
8 to 10 minutes
H2-Convection mode
Samosa
15 minutes
Naan
10-12 minutes
Omlette
10-12 minutes
Cheese pops breaded
14 -16 minutes
Note : Inbuilt preheat option is set for 2 minutes where microwaves mode helps preheat the
Teflon coated tawa greased with less oil /no oil before food is cooked . Place the tawa on the
low rack before starting the programme.
When the preheating of tawa is complete , place food on the hot tawa and set the cooking