Changing a programme with resetting
If you would like to cancel a program while a washing program is resumed
Switching the machine off
Note: You can slightly open the door in order for the machine to perform a faster dry operation after
the wash programme is finished.
Note: If the machine door opens during washing or the power is cut off, the machine will go on to the
program in case the door is shut or the power is back.
Press once the Power
Start/Pause key.
Turn the Program
Selection Button to Reset
Press once the Power
Start/Pause key.
The machine will discharge the
water in it for nearly 30 sec.
The program will have been
cancelled once the drying lamp
goes off and the lampFinshed is
on.
When the lamp “End” lights up,
switch your machine off by using
the Power On/Off button.
Pull the plug out of the outlet.
Turn of the water tap.
Note: If energy is cut or machine door is opened during drying process, program is terminated. Your machine
becomes ready for new program selection.
To Next Page
